Watts ISCA-101-D - Manual

ES-WD-ISCA-101-D USA 1342 ISCA-101-D
Tag:
SPECIFICATION: Watts Drainage ISCA-101-D Industry Standard back-to-back horizontal adjustable water closet carrier with
epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron patent
pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair
height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts.
Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Industry Standard
Back-To-Back Horizontal
Adjustable Closet Carrier
ISCA-101-D
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" anchor
bolts (by others).
X = 5-3/4" (146mm) Maximum with Standard Nipple
15" (381mm)
9" (229mm)
7-1/2" (191mm)
4-7/8"
(124mm)
MIN
9-1/2"
(241mm)
MAX
17-3/4" (451mm)
0" (0mm) MIN
4" (102mm) MAX
5/16" (8mm)
X
2-3/32" (53mm)
10-5/8" (270mm)
15-1/2" (394mm) MIN 25-1/2" (648mm) MAX
X
2-3/32" (53mm)
5/16" (8mm)
10-1/4"
(260mm)
6"
(152mm)
2-3/4"
(70mm)
ABS NIPPLE
W/INTEGRAL
TEST CAP
ASTM C564
COMPRESSION
GASKET
Note: Extended nipple (-M1) option cannot be used with –XH carriers.
Options (Select One or More)
Suffix Description
-M1 -M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
-36 36" Long Barrel Fitting
CA-100-EXT Aux. Support System w/Extended Nipple
-HS Hub & Spigot Connections
-XH Extra Heavy 500lbs. Carrier
(ASME A112.6.1M) with 3/4”-10
Stainless Steel Studs
-US Buy American Compliant