Watts TR24P1 IPS Caps - Manual

For Residential and Commercial Polyethylene Pipe Applications
ES-TR24P1-END CAPS
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––
Series TR24P1
TRITON ™ End Cap Fittings
Sizes: 3 ⁄
4
" – 2" (20 – 50mm)
TRITON Series TR24P1 End Caps are used to seal one end of
a polyethylene pipe. The fittings are manufactured of PE 4710
and are compatible with most polyethylene piping materials.
(Consult ES-TRPE-Comp for compatibility information.) The fit-
tings are designed to be used with the TRITON TRCU1 Control
Unit and TRFWP1 Fusers to complete the connection.
Specifications
The system shall be plumbed using Watts TRITON Pipe Fusion
fittings. Each fitting will incorporate the patent-pending TRI-
TON Fuse-Tel™ fusion indicator that will provide a visual and
tactile indication that the weld has been successfully complet-
ed. The TRITON Pipe Fusion system will operate on 110/115
VAC power and utilize a 13.56MHz ISM band frequency in
conjunction with a dual susceptor embedded in the fitting to
complete the fuse.
TR24P1
Dimensions — Weights
Installation Notes
• Fitting and pipe must be free of grease, oils, water, and debris.
Wipe each fitting and pipe end before insertion of pipe into fitting.
• Pipe must be inserted to the correct depth "B" inside the fitting.
Use the depth gauge on the side of the fitting to properly mark
the required insertion depth on the pipe.
Standards
Manufactured in accordance with American Society
for Testing and Materials
ES-TR24P1-ENDCAPS 1308 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
TM
A B
C
MODEL inLEt DiMEnSiOnS WEight
SIZE (DN) A B C
in. mm type in. mm in. mm in. mm lbs. kgs.
TR24P1-12-IPS 3 /
4
20 IPS 3 1 /
16
78 2 1 /
4
57 1 11 /
16
42 0.25 0.112
TR24P1-16-IPS 1 25 IPS 3 1 /
4
82 2 1 /
4
57 2 51 0.12 0.054
TR24P1-20-IPS 1 1 /
4
32 IPS 3 7 /
16
87 2 1 /
4
57 2 3 /
8
60 0.16 0.072
TR24P1-24-IPS 1 1 /
2
40 IPS 4 1 /
8
105 2 13 /
16
71 2 11 /
16
69 0.25 0.111
TR24P1-32-IPS 2 50 IPS 4 7 /
16
113 2 13 /
16
71 3 5 /
16
85 0.38 0.173