Watts QC894S User Manual
Qc-kwikstop, For residential and commercial applications, Sizes
For Residential and Commercial Applications
ES-QC-KwikStop
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
Angle Pattern
QC-KwikStop
®
Quarter-turn Water Supply Stops
with Quick-Connect Technology
Sizes:
3
/
8
" x
3
/
8
" (10 x 10mm),
1
⁄
2
" x
3
/
8
" (15 x 10mm), and
1
⁄
2
" x
3
/
8
" x
3
/
8
" (15 x 10 x 10mm)
Features
• Available in angle and straight pattern
•
3
⁄
8
" or
1
⁄
2
" (10mm or 15mm) CTS Quick-Connect inlet
• May be used on copper, CPVC, and PEX
• May be removed and reused
Models
QC894A
1
⁄
2
" CTS x
3
⁄
8
" O.D. Comp (Angle)
15mm CTS x 10mm O.D. Comp (Angle)
QC894S
1
⁄
2
" CTS x
3
⁄
8
" O.D. Comp (Straight)
15mm CTS x 10mm O.D. Comp (Straight)
QC889A
3
⁄
8
" CTS x
3
⁄
8
" O.D. Comp (Angle)
10mm CTS x 10mm O.D. Comp (Angle)
QC889S
3
⁄
8
" CTS x
3
⁄
8
" O.D. Comp (Straight)
10mm CTS x 10mm O.D. Comp (Straight)
QC389403
1
⁄
2
" CTS x
3
⁄
8
" O.D. Comp x
3
⁄
8
" O.D. Comp
(Dual Outlet Angle)
15mm CTS x 10mm O.D. Comp x 10mm O.D. Comp
(Dual Outlet Angle)
Materials
Body: Brass
Stem: Brass
Handle: Zinc, chrome plated
O-Ring: EPDM
Collet: Zytel
Collet Cover: HDPE
Pipe Insert: Polysulfone
Product Submittal
Model No.
to Submit
Quantity
QC894A
QC894S
QC889A
QC889S
QC389403
Straight Pattern
Dual Outlet Angle
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.