Watts PWWJCMB - Manual (Page 3)

3
Low Pressure Drop
Jumbo Cartridge Filter Systems are designed to minimize pres-
sure drop, by using 2" pipe fittings and large diameter center
tubes. (See chart at right for pressure drop data using pleated
cartridges.)
Specifications
Jumbo Cartridge Filter Housing Jumbo Cartridge Filters
Specifications Data
Body Glass reinforced PP
Gauge port 1 ⁄
4
" FNPT brass reinforced
Swing bolts 304 stainless steel
Oring (lid) EPDM
Pipe fittings 2" slip PVC female
Overall height 42.7"
Width (vessel OD) 15.4"
Maximum temperature 125°F (52°C) @ 80 PSI
Maximum working pressure 125psi (8.75 bar)
Specifications Data
Maximum flow rate (Pleated) 150 GPM* (34 M3/hr.)
Max. flow rate (1 Micron Absolute) 50 GPM (11.3 M3/hr.)
Max. flow rate (Depth) 100 GPM (22.7 M3/hr.)
Max. flow rate (Activated Carbon) 15 GPM (3.4 M3/hr.)
Cartridge end caps Glass reinforced PP
O-rings (cartridge) EPDM
Watts ® Jumbo Cartridge Specifications
Pleated Depth Activated Carbon
Media PP PP Activated carbon
End caps PP + FG PP + FG PP + FG
Center tubes PP PP PP
Maximum flow rate (GPM) 150 100 15
Maximum temperature 125°F (52°C) 125°F (52°C) 125°F (52°C)
Maximum°ΔP (psi) 30 40 30
Chemical resistance Excellent Excellent Not a factor (for water only)
Length (media) 26-1/4" 26-1/4" 26-1/4"
O-rings (dual) EPDM EPDM EPDM
Shipping weight (lbs.) 5 5 5
Carton dimensions 7" x 7" x 31" 7" x 7" x 31" 7" x 7" x 31"
Micron ratings 1A, 1 & 5* ,20 & 50**, 150*** 1, 5, 20, 50 5
* Highly dependent on micron rating, solids content and other factors. Please see
pressure drop chart below.
*Polypropylene fabric
**Polyester fabric
***Polypropylene mesh screen
Note: Flow rates are based on each specific application, micron rating, solids content and a number of other factors. End user should consider these factors when
selecting the filter housing (or number of filter housings) needed for their particular requirement.
pressure Drop (psi)
0 25 50 100 125 150
1 Abs.
15
10
5
Flow (GpM)
1 µm
5 µm
20 µm
50 µm
150 µm