Watts ISCA-123 - Manual

ES-WD-ISCA-123 USA 1338 ISCA-123
Tag:
SPECIFICATION: Watts Drainage ISCA-123 Industry Standard single vertical adjustable water closet carrier with epoxy coated
cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron patented compression seal
faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, ductile iron rear
anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and
hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 750 lb.(350 kg.)
static load.
Industry Standard
Single Horizontal 750 lb.
Closet Carrier
NOTE: All foot supports must be securely anchored to concrete
floor with min. 1/2"(13) anchors with pull-out force of 500 lbs.
(227 kg). Rear anchor support must be securely anchored with
min. 1/2"(13) anchors with pull-out force of 1000 lbs. (454 kg).
USA: 100 Watts Road, Spindale, NC, 28160-2298; TEL: 828-288-2179 TOLL-FREE: 1-800-338-2581 www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ISCA-123
Options (Select One or More)
Suffix Description
-M20 Flush Valve Support
-HS Hub & Spigot Connections
-M11 Tiling Frame
-US Buy American Compliant
17 3/4"(451)
4 7/8"(123)MIN.
9 1/2"(242)MAX.
7 1/2"(191)
15"(381)
9"(229)
5"(127)MIN. 9"(229)MAX.
4 1/2" (115) 5" (127) 5 1/2" (140) 6" (152)
17 3/4"(451)
21 3/4"(552)
12 1/2"(318)
5 1/2"
(140)
5 1/2"
(140)
2"(51)
NH VENT
1 9/16"(39)
2 3/16"(54)
5 3/8"
(137)
4 1/4"
(108)
3"(76)MIN.
4"(102)MAX.
5/16"(7)
4"(102) NH
6 3/8"(162) 9 7/16"(240)
11"(279)
REAR SUPPORT LUG & ANCHOR BAR ASSEMBLY
BASE SUPPORT
THRUST BEARING NUTS & WASHERS
FINISHED WALL
ABS COUPLING WITH INTEGRAL TEST CAP
TOP VIEW