Watts ISCA-101-L/R - Manual

ES-WD-ISCA-101-LR USA 1342 ISCA-101-L/R
Tag:
SPECIFICATION: Watts Drainage Products ISCA-101-L/R Industry Standard single horizontal adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron
patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and
wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and
chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb.(136 kg.) static load.
Industry Standard
Single Horizontal
Adjustable Closet Carrier
ISCA-101-L/R
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
X = 5-3/4" (146) Maximum with Standard Nipple
Note:
Left hand carrier shown; right hand carrier is mirror image.
0" MIN 4" (102) MAX
9" (229)
15" (381)
7-1/2" (191)
4-7/8" (124)
MIN
9-1/2"(241)
MAX
17-3/4" (451)
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
-36 36" Long Barrel Fitting
CA-100-EXT Aux. Support System w/Extended Nipple
-HS Hub & Spigot Connection
Extra-Heavy 500lb. Carrier (ASME A112.6.1M)
with 3/4" - 10" Stainless Steel Studs
-XH
-US Buy American Compliant
10-1/4" (260)
6" (152) 2-3/4" (70)
1-1/2" (38)
2-3/16" (56)
5-5/16"
(135)
2-3/32" (53)
X"
5/16"
(8)
11-1/2" (292mm) MIN 16-1/2" (419mm) MAX