Watts LFWP18B - Manual

Note: Watts WaterPEX CinchClamp ™ fittings should not be
used with wrought copper PEX fittings.
LFWP18
CrimpRing TM Tee
Lead Free * Brass CrimpRing ™ Tees
* The wetted surface of this product contacted by consumable water
contains less than one quarter of one percent (0.25%) of lead by weight.
For Residential and Commercial Applications
ES-WP-LFBrassTees
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE
*
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Lead Free* Brass CrimpRing ™ Tees are used for making
directional changes in potable systems. The Lead Free* brass
CrimpRing ™ Tees feature Lead Free* construction.
Specifications
System shall be plumbed using Watts WaterPEX ® cross-linked
polyethylene pipe, and all joints shall be made using Watts
Lead Free* Brass CrimpRing ™ and/or Poly-alloy CrimpRing ™
fittings using either the Watts copper CrimpRing ™ or stainless
steel CinchClamp ™ crimping methods as outlined in the Watts
Installation Guidelines. Lead Free* Brass CrimpRing ™ fittings
shall comply with state codes and standards, where applicable,
requiring reduced lead content.
Installation Note
CrimpRing ™ Tees must be installed in accordance with all Watts
installation procedures, including information provided in installa-
tion manual and guidelines.
Approvals
• Manufactured in accordance with American Society for Test-
ing and Materials (ASTM International) F877 and F1807
• Listed by the NSF International to NSF Standards 14 and 61
for use in potable water systems
• Listed by NSF International to be in compliant to the Uniform
Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the
CSA Standards B137.5