Watts ISCA-151-D - Manual

ES-WD-ISCA-151-D USA 1344 ISCA-151-D
Tag:
ISCA-151-D Industry Standard Back-to-back
Offset Thin Wall Closet Carrier
SPECIFICATION: Watts Drainage ISCA-151-D back-to-back vertical thin wall closet carrier with offset epoxy coated cast iron
fitting, 4" (102) no hub waste and 2" (51) no hub vent connections, epoxy coated cast iron patented compression seal
faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS
nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome caps nuts. Carrier complies with
requirements of ASME A112.6.1M up to a 300 lb. (136 kg.) static load.
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
-M23 2 "(51) RH Auxiliary Inlet
-M24 2"(51) LH Auxiliary Inlet
Notes:
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
X = 5-3/4" (146) Maximum with Standard Nipple
-XH Extra-Heavy 500lb. Carrier
(ASME A112.6.1M)
with 3/4”-10” Stainless Steel Studs
9"
(229)
7/1/2"
(191)
17-3/4"
(451)
4-1/2"MIN
(114)
9-1/2"MAX
(241)
15"
(381)
2-3/32" (53)
5/16"
(8)
5/16"
(8)
2-3/32" (53)
7" (178)
12" (305) MIN.
22" (559) MAX.
X"
X"
4"
-US Buy American Compliant