Watts TR24P1 IPS Caps - Manual

For Residential and Commercial Polyethylene Pipe Applications
ES-TRITON-PIPE COMPATIBILITY
Series TRP1
Pipe Compatibility
TRITON Series TRP1 RF Fusion Weld fittings are used to
transition polyethylene pipe. The fittings are manufactured
of PE 4710 and are compatible with all commercially manu-
factured High Density Polyethylene pipe up to and including
PE100 and PE4710 materials.
Compatible pipe designation codes include: PE3408,
PE3608, PE3708, PE3710, PE4608, PE4708, PE4710 ASTM
3350, PE100 and PE80 ISO.
TRITON TRP1 fittings may also be used with many MDPE
materials as well. Please consult factory for MDPE fusion
information.
Specifications
The system shall be plumbed using Watts TRITON RF Fusion
Welded pipe and fittings. Each fitting will incorporate the
TRITON Fuse-Tel™ fusion indicator that will extrude upon
completion of the joint and provide a visual and tactile indi-
cation that the weld has been successfully completed. The
RF welding system will operate on 110/115 VAC power and
utilize a 13.56MHz ISM band frequency in conjunction with a
dual susceptor imbedded in the fitting to propagate the weld.
Installation Notes
• Fitting and pipe must be free of grease, oils, water and
debris. Wipe each fitting and pipe end before insertion of
pipe into fitting.
• Pipe must be inserted into the fitting to the correct depth.
Use the depth feature on the side of the fitting to properly
mark the required insertion depth on the pipe.
Standards
• Manufactured in accordance with American Society for
Testing and Materials
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
TM
ES-TRITON-PIPE COMPATIBILITY 1314 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company