Brother MFC J6510DW - Manual (Page 64)

Chapter 6
50
Changing the remote codes
6
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose Remote Codes.
e
Press d or c to choose On (or Off).
Press OK.
f
Enter the new Fax Receive Code.
Press OK.
g
Press a or b to choose Tel Answer:
and enter the new Telephone Answer
Code.
Press OK.
h
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.