Brother DCP-377CW - Manual (Page 14)

14
For Wireless Network Users
For wireless network interface users
10
Before you begin
Although the Brother DCP-375CW can be used in both a wired and wireless network, only one of the connection
methods can be used at a time.
IMPORTANT
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press Menu. Press a or b to choose 3.Network and press OK.
Press a or b to choose 0.Network Reset, and then press OK.
Press a twice to choose Reset and Yes.
Note
To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access point)
you can find instructions in the Network User's Guide on the CD-ROM.
You can view the Network User’s Guide by following the instructions below.
1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive.
For Windows
® :
2 Choose your model and the language. The CD-ROM top menu will appear.
3 Click Documentation, and then click HTML documents.
For Macintosh:
2 Double-click Documentation, and then double-click your language folder.
3 Double-click top.html.