Metrohm 872 Extension Module Sample Prep - Manual (Page 19)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
872 Extension Modul – Sample Prep ￭￭￭￭￭￭￭￭ 11
3.5.3 Mounting the extension module on IC instrument
Note
Before you begin make sure that the preparation work (see Chapter
3.5.1, page 9) has all been carried out.
Dismounting covering plate
2
2
1
1
Figure 5 Covering plate from above
1 Cylinder screws 2 Covering stoppers
1 Dismounting covering plate
￭ Remove covering stoppers (5-2).
￭ Undo the cylinder screws (5-1) with a 6.2621.100 3 mm hexagon
key.
￭ Remove covering plate.
2 Mounting extension module
Place the extension module onto the IC instrument.