Metrohm 872 Extension Module Sample Prep - Manual (Page 18)

3.5 Mounting the extension module ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭ 872 Extension Modul – Sample Prep
2 1
2
1
2
1
2
2 1
Figure 4 Base tray from below
1 Cylinder screws
With washer. 2 Rubber feet
2 Dismounting base tray
￭ Undo the cylinder screws (4-1) with a 6.2621.100 3 mm hexagon
key.
￭ Remove base tray.
3 Mounting extension module on the base tray
￭ Place the extension module onto the base tray and fasten with
the cylinder screws (4-1).
￭ Set the extension module with the base plate back up.
￭ Place the IC instrument onto the extension module.