4 safety notes – Metrohm 771 IC Compact Interface User Manual
Page 12

1 Introduction
771 IC Compact Interface
6
1.4 Safety
notes
While electrical safety in the handling of the 771 IC Compact Interface is
assured in the context of the specifications IEC 1010-1 (protection class
1, degree of protection IP40), the following points should be noted:
•
Mains connection
The
mains connection must be effected in accordance with the
instructions in section 2.2.
•
Opening the instrument
Inside the instrument there are no parts which must be set or adjusted
by the user.
If the 771 IC Compact Interface is connected to the power supply, the
instrument must not be opened nor must parts be removed from it,
otherwise there is a danger of coming into contact with components
which are live. Hence, always disconnect the instrument from all
voltage sources before you open it and ensure that the
mains cable
is disconnected from mains connection
33
!
•
Protection against static charges
Electronic components are sensitive to static charging and can be
destroyed by discharges. Before you touch any of the components
inside the 771 IC Compact Interface, you should earth yourself and
any tools you are using by touching an earthed object (e.g. housing of
the instrument or a radiator) to eliminate any static charges which
exist.