Metrohm MagIC Net 2.4 User Manual
Page 15
8.102.8045EN
15
Device driver software was not successfully installed. No driver
found. The message should also show the name of the corresponding device.
Note this name and proceed as follows to install the driver manually:
Note
The following description applies for Windows 7 (64-bit version). It may
slightly vary for your system.
1 Open the Windows Device Manager. Under Other devices the corre-
sponding device can be found.
2 Click on the device with the right mouse button. The context menu
opens.
3 In the context menu, select Update Driver Software.... A dialog win-
dow opens.
4 Select Browse my computer for driver software. The file selection
dialog opens.
5 Navigate to the installation folder of MagIC Net (default: C:\Program
Files\Metrohm\MagIC Net).
6 In the installation folder, open the subfolder drivers. This folder contains
the subfolder 889, in which you can find the driver for the 889 IC Sample
Center and the Combustion Module.
7 Apply the selection with [OK]. A safety prompt is displayed. In order to
install the driver, click on [Install].
8 After the successful installation, close the Device Manager.
8 Adding additional licenses with Windows Vista
or newer
General
Since Windows Vista, Microsoft has introduced the UAC (User Account Con-
trol), which permits running tasks either as non-administrator or as administra-
tor (without changes of user, switching off or similar).
This function can, however, cause difficulties with client-server installations of
MagIC Net.