Metrohm Liquid Handling Station - Manual (Page 7)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
IC equipment: Liquid Handling Station
￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Description
The IC equipment: Liquid Handling Station is used for rinsing the sample
needle after sample aspiration.
The sample needle is rinsed with ultrapure water in the rinsing unit of the
Liquid Handling Station (6.2841.120) after each sample aspiration.
The IC equipment: Liquid Handling Station can be mounted on any Sam-
ple Processor equipped with a Swing Head and a peristaltic pump.
A trap column is installed between the supply bottle and the peristaltic
pump to ensure that the rinsing solution is free of ionic contamination.
1.2 About the documentation
This manual describes the installation of the IC equipment: Liquid Han-
dling Station and the connection of the capillary connections between the
supply bottle, the trap column, the peristaltic pump and the Liquid Han-
dling Station.
CAUTION
Please read through this documentation carefully before putting the
equipment into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the equipment.
Additional documentation
Topic Document
Mounting the Liquid Handling Station on
the Sample Processor Manual for the Liquid Handling Station
Installing the peristaltic pump and the
respective tubing
Care and maintenance of the pump tub-
ing
Manual for the Sample Processor