Metrohm 940 Professional IC Vario ONE/SeS/PP/Prep 1 User Manual
940 professional ic vario
Table of contents
Document Outline
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 3.1 Setting up the instrument
- 3.2 Capillary connections in the IC system
- 3.3 Removing the handle
- 3.4 Removing transport locking screws
- 3.5 Connecting the drainage tubing and leak sensor
- 3.6 Column thermostat
- 3.7 Connecting the eluent bottle
- 3.8 Connecting the eluent degasser
- 3.9 Installing the high-pressure pump
- 3.10 Installing an inline filter
- 3.11 Installing the pulsation absorber
- 3.12 Injection valve
- 3.13 Suppressor
- 3.14 Peristaltic pump
- 3.15 Metrohm CO2 Suppressor (MCS)
- 3.16 Installing the detector
- 3.17 Connecting the sample degasser (optional)
- 3.18 Connecting the instrument to a computer
- 3.19 Connecting the instrument to the power supply
- 3.20 Initial start-up
- 3.21 Connecting and rinsing the guard column
- 3.22 Connecting the separation column
- 3.23 Conditioning
- 4 Operation
- 5 Operation and maintenance
- 5.1 IC system
- 5.2 Capillary connections
- 5.3 Servicing the door
- 5.4 Column thermostat – Replacing the capillaries
- 5.5 Handling the eluent
- 5.6 Servicing the eluent degasser
- 5.7 Notes on operating the high-pressure pump
- 5.8 Servicing the high-pressure pump
- 5.9 Servicing the inline filter
- 5.10 Servicing the pulsation absorber
- 5.11 Injection valve
- 5.12 Suppressor
- 5.13 Peristaltic pump
- 5.14 Servicing the Metrohm CO2 Suppressor (MCS)
- 5.15 Servicing the detector
- 5.16 Rinsing the sample path
- 5.17 Separation column
- 5.18 Quality Management and qualification with Metrohm
- 6 Troubleshooting
- 7 Technical specifications
- 7.1 Reference conditions
- 7.2 Device
- 7.3 Ambient conditions
- 7.4 Housing
- 7.5 Leak sensor
- 7.6 Column thermostat
- 7.7 Eluent degasser
- 7.8 High-pressure pump
- 7.9 Injection valve
- 7.10 Suppressor
- 7.11 Peristaltic pump
- 7.12 Metrohm CO2 Suppressor (MCS)
- 7.13 Detector
- 7.14 Sample degasser
- 7.15 Power connection
- 7.16 Interfaces
- 7.17 Safety specification
- 7.18 Electromagnetic compatibility (EMC)
- 8 Warranty (guarantee)
- 9 Accessories
- Index