Metrohm 881 Compact IC pro – Cation - Manual (Page 18)

3.1 About this chapter
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
881 Compact IC pro – Cation
3 Installation
3.1 About this chapter
The Installation chapter contains:
￭ this overview.
￭ a brief set of instructions for the initial installation of the 881 Compact
IC pro – Cation. At each step you will find cross-references to more
detailed installation instructions for individual components, should you
require such aids.
￭ an installation diagram (see Figure 3, page 13), showing a com-
pletely installed 881 Compact IC pro – Cation.
￭ several chapters with detailed installation instructions for all compo-
nents, including those that are already installed at the time the instru-
ment is delivered.
3.2 Initial installation
Note
A number of the capillaries is already connected at the time the instru-
ment is delivered.
The following work steps must still be carried out:
Installing 881 Compact IC pro – Cation
1 Setting up the instrument
(see Chapter 3.4, page 14).
2 Installations on the rear of the instrument
￭ Place the detector in the instrument and connect it (see manual
of the detector).
￭ Remove transport locking screws (2-4) and (2-8) keep them in a
safe place (see Chapter 3.6.1, page 17).
￭ Connect the leak sensor (see Chapter 3.6.2, page 17).
￭ Connect the drainage tubings (see Chapter 3.6.3, page 18).