Metrohm 818 IC Pump - Manual (Page 24)

3 Operation
818 IC Pump / 8.818.1023 Instructions for Use
18
3 Operation
The operation of 818 IC Pump is made completely via the Metrohm
software «IC Net».
This section describes only the most important points concerning the
operation of the 818 IC Pump. For further details please refer to the
«IC Net» Instructions for Use and to the on-line help in the PC
program.
3.1 Switch instrument on/off
The 818 IC Pump is switched on and off using mains switch 10 on the
rear of the instrument (sse Fig. 2). When the instrument is switched on
the mains pilot lamp 1 lights up to show that the instrument is ready for
use.
3.2 818 IC Pump icon
818 IC Pump
3.3 Settings in the "818 IC Pump" window
By double-clicking the 818 icon by clicking this icon with the right
mouse button and selecting the Open menu item the 818 IC Pump
window for parameter settings is opened. It consists of the four tabs
Settings , Program , Links and Advanced .