Dulce Systems PRO Q - Manual (Page 8)

Page 15
PRO Q Installation and User’s Manual
Cable length selection
The PRO Q is pre-configured for cable length of 1 to 7-meters, this step can be
skipped if the cable is within this range. If a 10-meter cable is to be used,
change the switch setting accordingly.
4.2.2. HBE Card Installation
The PCI-e HBE Card requires a x8 slot or larger. Computers with PCI-e slots
less than x8 will not physically accommodate the HBE. PCI-e slots x8 or larger
will work.
Typical
Windows PC Apple Mac Pro
and Power Mac
HBE upright
7 6 5 4 3 2 1 1 2 3 4 5 6 7
1 to 7-meter cable = (default)
10-meter cable =
Back of PRO Q
HBE upside down
Set both
PRO Q & HBE
Page 16
PRO Q Installation and User’s Manual
4.2.3. HBE Cable Connection
The HBE PCI-e x8 cable carries 8 lanes of the PCI-e interface. The green tab is
up in this orientation. To remove, pull the tab to unlock the latches and then pull
the metal body to remove the connector.
4.2.4. Mac Connection
Mac Pro or Power Mac
Green
Tab on
top.
Green
Tab to
bottom.
Uplink
Port x8
Switches to
left, green
Tab on top.