Getting started – Dulce Systems PRO DQ User Manual
Page 5
Page 8
PRO DQ Installation and User’s Manual
1.2.
System Requirements
Operating Systems:
• Windows XP / Vista 32/64-bit.
• Mac OS X 10.4 or higher.
• Apple Power Mac G5 with one available PCI-e x8 slot.
• Apple Mac Pro with one available PCI-e x8 slot.
• Windows compatible PC with one available PCI-e x8 slot.
• Internet connection (to download drivers and utilities).
1.3.
Technical Support
Phone
818-435-6007
FAX
818-576-0324
Web
www.dulcesystems.com
If the product requires service, please contact Dulce Systems’ Technical Support
and obtain an RMA number. Ship the product properly packaged to:
Dulce Systems
Attn: RMA
9620 Topanga Canyon Place,
Suite E
Chatsworth, CA 91311
Page 9
PRO DQ Installation and User’s Manual
2. Getting Started
The PRO DQ comes pre-assembled and ready for use, just install the drives and
the supplied PCI-e (PCI-express) RAID controller card in the computer, connect
the cables, install the software driver and RAID Console. If you are using a Mac,
you are good to go, by default the unit is pre-formatted for Mac OS X operation.
For Windows, a small format procedure is needed.
2.1.
Packaging
Please do not discard the boxes and packing materials in case you
might need to reuse them later. Always ship the product in its original
packaging. Improperly packaged products will be subjected to shipping
damage, for which you will be liable for the repair.
2.2.
Check List
• Installation and User’s Manual
• Power Cord (North America user only)
• Set of keys
• A 8 drive modules system enclosure
• 8 disk drive modules
• A PCI-e RAID Controller with two Quad Channel SATA II ports
• Two 1-meter Quad Channel SATA II cables