DJI iOSD mini - Manual (Page 2)

©2013 DJI Innovations. All Rights Reserved.
2
OSD Display Description
12.0V
1m
ATT
FS
0
0.0
1
2
3
9 6 8
D
H
P 0 o
R 0 o
4
5
7
11
m
V 0.0
s
10
12
45~179 45~179
13
Az 34°
94%
15m
14
15
NO. Function Display Description
1 Power voltage 、 blink
Real time battery voltage of the aircraft power, unit in V. (For
PHANTOM 2 there will be current battery level percentage
shown in addition.)
Blink: first level low-voltage alert, the alert threshold is same
to the protection voltage value set in the assistant software.
2
Distance between aircraft
and home point
D
(unit in m) Show when the home point is successfully recorded
3 Height
H
(unit in m) Vertical height between the aircraft and the take-off point
4 Control mode ATT, M, GPS
 ATT is Atti mode
 M is Manual mode
 GPS is GPS mode
5 FailSafe mode FS, APT, GHome
 FS: FailSafe mode
 GHome: Go home
 APT: Ground station mode
6 Pitch attitude P 0 o
Positive value means the aircraft nose is pitching up;
Negative value means the aircraft nose is pitching down.
7 Roll attitude R 0 o
Positive value means the aircraft is rolling to right.
Negative value means the aircraft is rolling to left.
8 Flight velocity 0.0m/s Horizontal speed of aircraft.
9 GPS satellite 0 Number of GPS satellites acquired.
10 Aircraft nose direction 、 、
Home Point
0°
45° 45°
180°
Nose direction
Display the relative angle between the
aircraft nose and home point. The
aircraft nose is pointing to the home
point when the icon
is in the middle
of monitor screen, which can help users
to pull the aircraft back.
11 Vertical velocity
0.0 、
0.0 ：Upward speed in vertical direction
：Downward speed in vertical direction
12 Attitude line Use for aircraft attitude observation.