Notes – DJI Phantom 2 FPV HUB Kit User Manual

Page 4

the FPV HUB.

3) Please refer to Collocation1 to connect the wireless video

transmission module.

Notes

(1) If using the FPV HUB, the original 4-Pin cable and video cable on

PHANTOM 2 will be spared, please remove and clear them out.

Make sure the video cable is totally cleared without any copper wire

left to prevent short circuit damage.

(2) All the connection operations should be conducted when the

intelligent battery is powered off.

(3) Check whether pins of the connectors on the FPV HUB are straight

and in good condition before connecting. Please and plug and

unplug the connector carefully to avoid damage or short circuit.

(4) It’s not recommended to install the FPV HUB and extended devices

inside the PHANTOM 2 aircraft.

(5) Make sure to install the AVL58 away from the compass to avoid

interference.

(6) FPV HUB is non water-proof, if it is wet, please wash it with alcoholic

cleanser and dry it before use. Otherwise components may be

damaged cause of

electrochemical

corrosion.

(7) Do not leak any metal, conductive objects into the connector pins of

FPV HUB to prevent short circuit damage.

(8) It’s not recommended to use cables not in the kit to connect devices