DJI S800 EVO - Manual (Page 21)

FAQ (Trouble Shooting)
Solder ESC
Make sure to solder the thick wires and fine wires correctly, when solder ESC to frame arm.
Clockwise and counter clockwise motor should be soldered to ESC correctly by different color order.
For arms For arms
G
V
G
P
G
V
G
P
Blue
Solder pad
Fine wire
Thick wire
Black
Red
Blue
Black
Red
Thick wire
Fine wire
Assemble the Vibration Absorber of Motors
The soft gasket is a part of the Vibration Absorber and it has a thick end and a thin end, it’s important to assemble
the soft gaskets in correct approach adhere to the diagram below.
Propeller CCW: the thick ends of the gaskets (A) are upwards, the thick ends of the gaskets (B) are downwards.
Propeller CW: the thick ends of the gaskets (C) are downwards, the thick ends of the gaskets (D) are upwards.
Propeller CCW Propeller CW
A
B
C
D