Programming modes – Calculated Industries 6020 v2.0 User Manual
Page 8

1) To reset your Custom Scale setting to
a one-to-one ratio, press [Reset] and
[Subtract/Count] simultaneously.
2) Then press the [Mode] key until the
“Custom” mode appears.
3) Begin rolling.
Memory Function Keystrokes
[Rcl] [M1+]
or [Rcl] [M2x]
Displays the value stored in the memory
register.
[Reset]
and [M1+] simultaneously
or
[Reset]
and [M2x] simultaneously
Clears the value stored in the memory
register.
[Reset]
and [Rcl] simultaneously
Clears values stored in memory
registers (the [M1+], [M2x], and height
registers).
Programming Modes
Custom Scale
You can program and store six Custom
Scales: three in Imperial (English) and
three in Metric Units.
You can set a custom scale two ways: by
“rolling in” a known distance or by set-
ting the exact distance.
8 – Scale Master
®
Classic
6020UG-EFS-C 6/27/03 2:19 PM Page 8