Calculated Industries 6020 v2.0 - Manual (Page 12)

4) Press [Rcl] [M2x]. The first press dis-
plays the linear value stored in this
register. Press [M2x] a second time to
calculate and display the area. Press
the [M2x] key again to find volume.
Press a fourth time to display the
height value stored.
Converting Between Scales
The Scale Master Classic can automati-
cally convert values between scales.
For example, 20 feet rolled in 1/16”
scale will be converted to 10 feet in
1/8” scale. You may want to roll a
value in one scale and then add that
exact value (unconverted) in another
scale.
1) Roll a value and press [M1+]. Press
[Scale] to change scales.
2) Roll another value and press [M1+].
3) Press [Rcl] [M1+] to recall the
combined total.
Locking Scale Settings
Your Scale Master Classic comes
equipped with a lock switch that pre-
vents inadvertently changing drawing
scales. When the lock is activated, a
lock symbol will be displayed in the
LCD. While active, the Scale and Mode
cannot be revised (other than by
removal of the battery).
12 – Scale Master ® Classic
6020UG-EFS-C 6/27/03 2:19 PM Page 12