Calculated Industries 9426 - Manual (Page 7)

Memory Functions
The ScheduleCalc allows you to store,
add, subtract, replace and recall up to 10
separate Memory values. Memory values
do not change unless revised or the
calculator is reset to its default state.
Values can be stored in any format.
Note: Memories 1–9 store a single value,
while Memory “0” maintains a cumulative
total. When adding to Memory “0,” only
values of the same convention (i.e., hour,
minute, second, day, week, month or year),
may be added. Otherwise, enter values but,
no format.
[Stor] [0] through [9]
Enters and stores a value in Memory
registers 0–9. Press
[Stor], then the
number key representing the Memory
register in which you want the value
stored.
[Rcl] [0] through [9]
Recalls values stored in Memories 0–9.
[0] [Stor] [1] through [9]
Clears the value from the Memory reg-
ister coinciding with the number key
(1–9) pressed.
Owner’s Manual—7