Calculated Industries 9426 - Manual (Page 39)

Rate Function
The rate function is used to multiply a
dimensional value by a per-unit rate
where the results are displayed as a
unitless value.
[Stor] [
.
]
Permanently stores a unitless value as
the rate. You may clear the value by
performing a “
Full Reset/All Clear”
( [Conv] [x] ) or replace it with another
value.
[Conv] [
.
]
Multiplies a dimensional value by the
rate or temporarily overrides a stored
rate.
When entering a math string, [Conv]
[
.
] pressed after a unitless value will
override the previous rate. For exam-
ple, if you enter
2.5 [Hour] x 10
[Conv] [
.
], ScheduleCalc uses 10 as
the rate instead of the stored value.
Owner’s Manual—39