Calculated Industries 9426 - Manual (Page 50)

[Day] — Days
Used to enter a value as days. When
used with [Conv], the displayed
value is converted to days. When
used with [Stor], you may change
the number of work hours per day.
(Enter a value then press [Stor]
[Day].) Used with [Rcl], displays
work hours per day.
[ : ] — Separator
Used to separate time units. When
used with [Conv],the displayed time
value is converted to 24-hour for-
mat. For example, 3:00:00 pm is
converted to 15:00:00. See “
Time
Values” section.
[Hr] — Hours
Enters the displayed value as hours.
Used with [Conv] to convert other
time values into decimal hours or the
Hour:Minute:Second time format.
[Min] — Minutes
Enters displayed value as minutes.
Used with [Conv] to convert other
time values into decimal minutes or
the Minute:Second time format.
[Sec] — Seconds
Enters displayed value as seconds.
50—ScheduleCalc™