Calculated Industries 9426 - Manual (Page 4)

Basic Calculator Information
Power On/Off
The ScheduleCalc is powered on by
pressing the
[On/C] key and powered
off by pressing the [Off] key. If already
on, a single press of [On/C] clears the
last entry. A double press clears all
temporary values.
Automatic Shut-off
If left on more than eight minutes with-
out activity, the auto-save feature shuts
the calculator off. When this occurs, all
values stored in Memory or shown on
the display are cleared. An activated
timer/stopwatch disables the automatic
shut-off.
Full Reset/All Clear
Your calculator is programmed with a
special two-key sequence,
[Conv] [x].
This key sequence clears all Memory
registers and resets the calculator to its
default state.
Operating Fundamentals
4—ScheduleCalc™