Calculated Industries 9426 - Manual (Page 46)

[On] — On
Turns power on. One press clears
the last entry. Two presses clear all
temporary registers.
[Off] — Off
Turns power off, resetting all non-
permanent storage registers.
[Conv] — Convert
Used to convert from one unit to
another of the same convention
(e.g. hours to minutes, months to
weeks, etc). Also used to access spe-
cial functions.
[Stor] — Storage
Stores displayed values.
[Rcl] — Recall
Used to recall stored values.
[Beg] — Beginning Point
Enters/solves for the starting date or
time. Used with the [End] and/or
[Dur] keys. See “
Begin, End and
Duration” section.
[End] — End Point
Enters/solves for the end date or
time. Used with the [End] and/or
[Dur] keys. See “
Begin, End and
Duration” section.
Keycap Definitions
46—ScheduleCalc™