Bully Dog 221102 Rapid Flow Induction - Manual (Page 11)

0
RAPID FLOW INDUCTION
WArrANTy & dISCLAImEr
.
REMEMBER, THIS IS A PERFORMANCE PRODUCT, USE AT YOUR OWN RISK.
This product is not intended to be used to break the law.
Do not use this product until you have carefully read the following agreement. This agreement sets forth the terms and conditions
for the use of this product. The installation of this product indicates that the buyer has read and understands this agreement and
accepts the terms and conditions. Never exceed recommended vehicle or tire top speed ratings.
DISCLAIMER OF LIABILITY
Bully Dog Technologies, LLC. Its distributors, jobbers, and dealers (hereafter Seller) shall be in no way responsible for the product’s
proper use and service. THE BUYER HERBY WAIVES ALL LIABILITY CLAIMS.
The Buyer acknowledges that he is not relying on the Sellers skill or judgment to select or furnish goods suitable for any particular
purpose and that there are no liabilities which extend beyond the description on the face hereof, and the Buyers hereby waivers
all remedies or liabilities expressed or implied, arising by law or otherwise, (including without any obligation of the Seller with
respect fitness, merchantability and consequential damages) or whether or not occasioned by the Seller’s negligence.
The Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages. The Buyer acknowledges
and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the Buyer agrees to
indemnify the Seller and to hold the Seller harmless from any claim related to the item of the equipment purchased. Under no
circumstances will the Seller be liable for any damages or expenses by reason of use or sale of any such equipment.
The Seller assumes no liability regarding the improper installation or misapplication of its products. It is the installer’s responsibil-
ity to check for proper installation and if in doubt contact the manufacturer.
The Buyer is solely responsible for all warranty issues from the manufacturer.
LIMITATION OF WARRANTY
BULLY DOG TECHNOLOGIES, LLC. (Hereafter “Seller”) gives Limited Warranty as to description, quality, merchantability, and fitness
for any particular purpose, productiveness, or any other matter of Seller’s product sold herewith. The Seller shall be in no way re-
sponsible for the products proper use and service and the Buyer hereby waives all rights other than those expressly written herein.
This warranty shall not be extended, altered or varied except be a written instrument signed by Seller and Buyer.
The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the products kit. All
products that are in question of Warranty must be returned prepaid to the Seller and must be accompanied by a dated proof of
purchase receipt. All Warranty claims are subject to approval by BULLY DOG TECHNOLOGIES, LLC.
Under no circumstances will the Seller be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or
reinstallation of this product or any other contingent expenses.
Under no circumstances will the Seller be liable for any damage or expenses incurred by reason of the use or sale of any such equip-
ment.
IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT: THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN
A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE TO THE PLACE OF PURCHASE WITHIN THIRTY (30) DAYS
FROM DATE OF PURCHASE FOR A FULL REFUND.
THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS
ITS TERMS AND CONDITIONS.
CONDITION POSSIBLE SOURCES ACTION
How often should I
clean the filter?
Maintenance
Depending on conditions, generally 5,000 miles or 3
months. Keep in mind that a dirty filter robs fuel econ-
omy and performance. A good rule of thumb is to clean
the filter every time you change your oil.
Can I purchase a
second filter?
Maintenance
Yes, the part number for the replacement filter is
224895. Many customers purchase the second filter
and install it and then clean the filter that was in
the system thereby they always have a clean filter
standing by.
Why use a pre-filter? Maintenance
The Pre-filter makes it much easier to clean the filter,
keeping bugs and other debris out of the ribs of the
filter. It is designed to flow more than the air filter,
so it will not change the performance of the RFI
system. Part Number for Pre-filter is 225100.
How long is required
to let the filter dry
after oiling the filter?
Maintenance
Generally 20 minutes should be sufficient. It’s very
important that the filter not be installed back on the
vehicle if it isn’t completely dry.
What does the Bully
Dog Cleaning Kit
include?
Maintenance
The Cleaning Kit, Part # 229000, includes both an Air
Filter Cleaner and an Air Filter Oil.
Intr
odu
ctio
n
Stock Remo
val
RFI I
nsta
llati
on
Filte
r M
ain
ten
enc
e
Tro
uble
sho
otin
g/F
AQ
W
arra
nty
/Dis
cclia
m
er