Bully Dog 82200 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82010, 82200
5. Hang the Muffler from Hangers B and C.
6. Install the Front Piece Tail Pipe over the rear axle.
Confirm that the bend of the Tail Pipe is directly
over the rear axle. The Front Piece Tail Pipe will
hang from Hangers C.
7. Install the Tail Pipe Tip. There are extra clamps in-
cluded in this exhaust set. On some older model
trucks ’94-’96 there is no place on the truck to
hang Hanger D. If this is the case use the hanger
bracket included in the kit to hang the hangers, by
bolting it to the frame or welding it to the frame.
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
Install muffler
Installing the Front Piece of the Tailpipe
Front Piece Tail Pipe Installed
Hanger C Hanger B
Muffler
Hanger C
Front Piece Tail Pipe
Muffler
Hanger B
Hanger D
Front Piece Tail Pipe