Bully Dog 82200 Rapid Flow - Manual (Page 10)

9
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82010, 82200
TROUBLEShOOTINg/FAQ
CONDITION POSSIBLE SOURCES ACTION
Exhaust Rattle Exhaust Sounds
Either one of the clamps is not tight or the exhaust
is coming in contact with the chassis or body. Adjust
the exhaust to ensure that no contact is made.
Exhaust is too loud Exhaust Sounds
If your exhaust seems too loud, Bully Dog can sell
you another muffler which will allow you to double
stack mufflers. This extra muffler would take place of
one of the straight pipes included with this system.
This is only applicable for aluminized systems.
Part # 185011 for the aluminized
Exhaust is not loud
enough
Exhaust Sounds
If your exhaust is too quiet (and is being used ex-
clusively for off-road use) you can purchase another
straight pipe to replace your muffler.
This is only applicable for aluminized systems.
Part # 185017 for the aluminized