Rapid flow installation – Bully Dog 82020 Rapid Flow User Manual

Page 8

Text mode
Original mode

rAPid FlOW inSTAllATiOn

rapid Flow exhaust # 82020

6. Hang the Muffler from Hangers B and C.

7. Install the Front Piece Tail Pipe over the

rear axle. Confirm that the bend of the
Tail Pipe is directly over the rear axle.
The Front Piece Tail Pipe will hang from
both Hangers C and D.

8. Install the Tail Pipe Tip. There are extra

clamps included in this exhaust set. On
some older model trucks ’94-’96 there is
no place on the truck to hang hanger D.
If this is the case, use the hanger bracket
to hang hanger D.

Installing the Front Piece of the Tailpipe

Install muffler

Hanger B

Hanger C

Muffler

Front Piece Tail Pipe

Hanger B

Front Piece Tail Pipe

Hanger D

Hanger C

Front Piece Tail Pipe Installed

SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk