Bully Dog 82022 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82022
QUICk OVERVIEw FULL EXHAUST
Muffler Tail Pipe Tip
Straight Pipe
CLAMP AND HANGER PLACEMENT
Clamp
Hanger B
Hanger C
Hanger A
Clamp
Front Piece Tail Pipe
Catalytic Converter
(Stock)
Adapter
In these steps you will install the rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
tool s needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM