Bully Dog 82222 Rapid Flow - Manual (Page 7)

8
RAPid FlOW inSTAllATiOn
Rapid Flow Exhaust # 82222
2. Hang the Hanger Brackets. There are ex-
isting holes in the frame so no drilling is
required.
3. Place all of the supplied Hangers into
their appropriate locations as shown.
4. Bolt the Down Pipe in place using the
stock 13mm bolts.
5. Using Hanger A as a clamp, tighten it
down enough to hold one of the straight
pipes in place.
Install Straight Pipe
Hanger A
Down Pipe
Straight Pipe
Install Down Pipe
Install Hanger Bracket
Install Hangers