Bully Dog 82222 Rapid Flow - Manual (Page 5)

6
RAPid FlOW inSTAllATiOn
Rapid Flow Exhaust # 82222
REMOVAL OF STOCk EXHAUST SySTEM
In these steps you will remove the stock exhaust
system.
1. You will need a ratchet with a 24” extension
in order to remove the stock13mm bolts that
hold the down pipe onto the turbo. You may
have to combine different extensions to make
the 24” extension. It is recommended that you use
a silicone spray lubricate to help make the process
easier. You will reuse the stock bolts to attach the
new Rapid Flow exhaust.
2. Cut the stock exhaust in three places. Us-
ing a sawzall make your first cut directly be-
hind the muffler.
3. Cut in front of the resonator.
4. Cut the bottom of the downpipe where the stock
exhaust makes its bend.
5. Remove each piece of the stock exhaust system,
including the stock exhaust hangers. Use Spray lu-
bricant to aid in the
removal of the hangers.
Cut after the bend of the downpipe
Cut Exhaust directly after muffler
Cut Exhaust in front of resonator
Remove 13mm Bolts with 24” Extension
Remove Stock Hangers
13mm