Bully Dog 82202 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82400, 82202
6. Hang the Muffler from Hangers B & C.
7. Install the Front Piece Tail Pipe by sliding
it into the Muffler and tightening Hanger
C to hold it in place. Ensure that the
bend of the is directly over the axle. At
this point don’t tighten down Hanger C
completely, instead wait until the entire
exhaust is installed before tightening ev-
erything down completely.
8. Install the Tail Pipe Tip by sliding it into
the Front Piece Tail Pipe and hanging it
from Hanger D.
Install Front Piece Tail Pipe
Front Piece Tail Pipe
HangerD
Install Muffler
Hanger B
Install Tail Pipe Tip
Tail Pipe Tip
Hanger D
Front Piece Tail Pipe
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk