Bully Dog 82210 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
Measure for Straight Pipe
Install Straight Pipe
3”
MEGa CaB aDDITIONaL STEPS
1. At this point it is time to install the Straight Pipe. You will need to measure and cut the Straight Pipe for the
final fit. The cut will be on the 24” Straight Pipe. Keep in mind, when you make your final cut you will need
to leave an extra 3 inches of overlap when you cut the Straight Pipe. Do not cut the flared end.
2. Install straight pipe over the adapter and install the exhaust pipe. Remembering to put the band clamps on
before installing the straight pipe and exhaust pipe.