Bully Dog 83222 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 83222
QUICk OVERVIEw FULL EXHAUST
Cross Member
Pipe
Muffler
Driver Side Tail Pipe Tip
Passenger Side Tail Pipe
Straight Pipe Straight Pipe
( 4 door long box models only)
Down Pipe
Driver Side Tail Pipe
Y-Pipe
Passenger Side Tail Pipe Tip
CLAMP AND HANGAR PLACEMENT
Hanger A
Hanger B
Hanger C
Hanger D
Hanger F
Hanger E
Clamps
Clamps
Clamp
Clamp
Clamps
in these steps you will install the Rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape Measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM