beautypg.com

Stock removal – Bully Dog 51201 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 8

background image

7

Removing the Stock Intake:

1

. Unplug the MAF (mass air flow sensor) to do so properly, first pull the red tab located on

the bottom side of the sensor outward to release the locking mechanism. Disconnect the
sensor plug and harness from the mounted sensor. Move the harness out of the way, so that
the intake can be removed without damaging the sensor harness.

2. Disconnect OEM breather hoses 1&2 that are connected to the grey fitting and the crank
case ventilation fitting.

Stock Removal