beautypg.com

Intake installation – Bully Dog 51201 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 16

background image

15

6. Slide the small band clamps over the ends of breather hose 1. Next, slide the end of the
breather tube over the fitting on the Stage 2 tube. Take the other end of the small breather
hose and slide it onto the grey fitting. Install breather hose 2 onto the crank case ventilation
fitting and the other end onto the Stage 2 tube and tighten all of the band clamps.

Intake Installation

7. Finally, plug the mass air flow harness plug back into the mass air flow sensor. Being sure
to lock the MAF sensor plug in place.