beautypg.com

Intake install prep – Bully Dog 51201 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 12

background image

11

3. Install the MAF sensor into the MAF sensor intake tube. Secure the MAF sensor with the
stainless black oxide screws and nylon washers using a Phillips head screwdriver.

DO NOT USE STOCK SCREWS

4. With the tube secure in the lid, now install the air filter onto the part of the tube that is
inside of the lid. Secure the filter using the supplied band clamp, tighten the clamp until the
filter cannot be easily pulled off by hand.

Intake Install Prep