Bully Dog 53206 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 2)

RFI COLD AIR INTAKE
2
INTRODUCTION
This manual provides step-by-step installation instructions
for the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake
for 2005-2007 4.8L, 5.3L and 6.0L GM pickups and SUVs.
Installation requires a few basic tools and takes about 20 minutes.
TABLE OF CONTENTS
Parts Included ..............................................................................2-3
RFI Lid (53104-1)
RFI Base(53104-2)
RFI MAF Tube (53202-3)
Stage 2 RFI Tube (53206-3)
Coupler – Straight (53252-6)
Coupler – Hump (53252-5)
Air Filter w/ Band Clamp (224800)
Band Clamps (4 Qty.) (53253-7)
Installation ..................................................................................4-10
Removing the Stock Intake
Preparing the RFI
Installing the RFI
Maintenance ............................................................................11-12
TOOLS NEEDED
Flat-head screwdriver
Phillips screwdriver
8 mm socket
10 mm socket