Bully Dog 182060 Dodge 5.9L Cummins 2500-3500 94-02 - Manual (Page 9)

rAPid FlOW inSTAllATiOn
8
Complete System Installed
8. At this point, it is time to install the Straight
Pipe. Cut the Straight Pipe to the desired
length, keeping in mind that you need 3
inches of overlap when you cut the pipe. Do
not cut the flarred end.
9. Once the entire exhaust system is installed,
inspect the system to ensure that no part
of the exhaust is in direct contact with the
chassis or body; adjustments may be neces-
sary. Having any part of the exhaust system
in direct contact with any part of the body or
chassis will cause the exhaust to rattle.
10. Return to each of the Clamps and tighten
with a 9/16” wrench or socket. Again do not
over tighten the Clamps.
11. Stainless Steel and Chrome Tips are
available from Bully Dog to your truck that
polished, classy look.
Measure for Straight Pipe