Bully Dog 182060 Dodge 5.9L Cummins 2500-3500 94-02 - Manual (Page 8)

9
rAPid FlOW inSTAllATiOn
5. Hang the Muffler from Hangers B and C.
Ensure that the louvers in the muffler are
facing towards the front of the vehicle.
6. Install the Front Piece Tail Pipe over the
rear axle. Confirm that the bend of the
Tail Pipe is directly over the rear axle.
The Front Piece Tail Pipe will hang from
both Hangers C and D.
7. Install the Tail Pipe Tip. There are extra
clamps included in this exhaust set. On
some older model trucks ’94-’96 there
is no place on the truck to hang Hanger
D. If this is the case, use the two extra
clamps in place of Hanger D. If you call
tech support they can send you a hanger
tab that will allow you to secure it to the
vehicle or you can weld it.
NoTE: at this point it is recommended that you install the muffler and work back to the rear of the vehicle,
leaving the second Straight pipe out. The second Straight pipe is the piece that will be cut if needed in this
one-cut system.
7
Installing the Front Piece of the Tailpipe
Install muffler
Hanger B
Hanger C
Muffler
Muffler
Front Piece Tail Pipe
Hanger B
Front Piece Tail Pipe
Hanger D
Hanger C
Front Piece Tail Pipe Installed