Bully Dog 40430 GT for Hemi Plus - Manual (Page 26)

25
40430
GT f
or H
emi Plus
upDAtinG the Gt
(DETAILED STEPS FOR WINDOWS)
8. NOTE: This step varies depending on how you have connected the Bully Dog to your computer.
• If you have the Micro SD card connected to the computer:
- Disconnect it from the computer and put it in the GT.
- Then turn the GT on by connecting it to a computer or to a vehicle and turning the key to the Run position.
• If you have the GT connected to the computer:
- Press the second key from the top on the left side to get out of USB mode.
OR
- Disconnect the GT from the computer, plug it in to your vehicle, and turn the
key to the Run position.
9. Go to the Main Menu (press the top left button).
• The GT may display a race tree demo mode; the Main Menu cannot be accessed
during demo mode. Wait until the GT has returned to the main screen.
10. Scroll up and select Change Vehicle.
11. Select the vehicle make.
12. Select the vehicle year and model.
13. Confirm the selection by pressing YES (press the top right button).
14. The GT will load files and reboot to USB Mode.
the Gt has now been updated!