Bully Dog 40602 Adjustable Power Punch - Manual (Page 4)

3
Product dEScrIPtIon:
The product is made up of three different parts, the module box, the wiring harness which
includes the plugs, and the flip switch. Things to note on each part:
ThE MODULE BOx:
The module box holds the guts of the product, the circuit board, it
is very important that when this module gets mounted during in-
stallation that it is away from extreme heat and that it is not prone
to a lot of moisture.
ThE wIRINg hARNESS:
A the end of the wiring harness is two plugs, one male and one female
plug. Also notice that the plugs are identical to the stock plugs coming
off of the fuel pump on the tractor, these plugs are made specifically
to work with the John Deere tractor with no additional modification
necessary.
The Flip Switch (Only on Adjustable Power Punch):
Flip the switch back and fourth, notice it is a simple
toggle switch that has three positions: one 30%,
one 20%, and one at 10%. The flip switch does
not have any stock position so if the user wishes to
operate their tractor or combine at stock hp levels
they must remove the power module from the
tractor.
Product description