BLUESHAPE CVS8XW User Manual
Page 6
6
Installation
This charger is designed to ideally be installed on a wall.
We suggest you identify a favourable site, where the charger can be
located allowing easy access and at the same time keeping the
ventilation inlets free from obstruction:
-
proceed with the mounting bracket first:
-
put the bracket against the wall, and mark the 4 holes
-
screws and/or fittings are not included: choose proper screws or
fittings to fix the bracket to the wall that are specially suited to the
material in your wall and have sufficient holding power
-
fix the bracket firmly tightening all the 4 screws
- lift the charger and align the 4 lateral golden studs with the
corresponding slots on the mounting bracket